Prioridades de autoridad
Overview and instructions for working with authority priorities.
A priority order of names and subject headings (up to three when a bibliographic record's second indicator is a number 0 through 6) can be configured when you have multiple authority vocabularies defined for your system as identified in the list of vocabularies in your Metadata Configuration (see Configuring Cataloging). Esta función debe ser configurada por Ex Libris. If you want to implement this capability contact Support.
El propósito de la prioridad de autoridad es identificar la prioridad entre vocabularios de autoridad para control de autoridad, cuando se utilizan múltiples encabezados de asunto y vocabularios de autoridad de nombres.
Los vocabularios locales siempre tienen la máxima prioridad, aunque se definan de otra forma en la lista de prioridades.
When priorities have been configured for multiple subject headings or names authority vocabularies and users perform an F3 check of authorities in the Metadata Editor, all of the vocabularies defined are displayed, each in a separate tab. You will be able to search for the best matching authority by going through the tabs, choosing the relevant vocabulary and selecting the authority heading in it.
The linking process automatically searches for the best match according to the priority, see Linking Process with the Authorities - Link BIB Headings Job for Authority Priorities.
Cuando se hayan configurado las prioridades para múltiples encabezados de asunto y vocabularios de autoridades de nombres, se puede llevar a cabo una revisión con F3 de autoridades en el Editor MD, por ejemplo, y, cuando no se encuentre un encabezado en el vocabulario de la primera prioridad por defecto, el sistema revisa la segunda prioridad para coincidencias. Si no se encuentra un encabezado en el vocabulario de la segunda prioridad, el sistema revisa la tercera prioridad para coincidencias. Además de la funcionalidad de F3, esta capacidad se aplica al control de autoridad en general.
Note that for bibliographic records with a second indicator of 7 and $2 specified, the Ex Libris configuration options and behavior of this feature are slightly different for this scenario. Para registros bibliográficos con un segundo indicador de 7, Ex Libris puede configurar dos encabezados de prioridad. El vocabulario específico en $2 se considera la tercera (última) prioridad excepto cuando se haya configurado la opción de Excluir vocabularios. Cuando se usa la opción de Excluir vocabularios:
- Ex Libris puede configurar múltiples vocabularios (que usted define).
- The explicitly defined first and second priorities are not used.
- Bibliographic records are linked to authority headings when the value in $2 matches one of the vocabularies configured for Exclude Vocabularies.
- If the value in $2 does not match any of the vocabularies configured for Exclude Vocabularies, no linking occurs.
- Solo aparece el valor en $2 como etiqueta de autoridad en la lista de encabezados cuando se lleve a cabo una verificación de autoridades F3. Note that when the Exclude Vocabularies option is not used, tabs for the vocabularies specified in the first and second priority and the vocabulary specified in $2 appear in the headings list.
Esta característica admite vocabularios basados en las siguientes normas:
- MARC 21 / KORMARC
The authority priority configuration may contain a m ix of authority registry vocabularies.
No se admite prioridad de autoridad para vocabularios multilingües.
Puede haber consideraciones de la lista de tareas de actualizaciones de la Zona de la Comunidad asociadas con esta característica. See Creating a MARC21 Bibliographic Record,Browsing Bibliographic Headings, and Working with the Authority Control Task List When Authority Priorities Are Configured for more information.
Contact Ex Libris to configure the authority priorities for your system.
The authority priority configuration is only available in production environments.
Proceso de vinculación con las autoridades - Enlaza tareas de encabezados BIB para prioridades de autoridad
When authority priorities are configured and the scheduled linking job (Authorities - Link BIB Headings) runs, it looks for headings matches starting with the highest priority vocabulary. Si no encuentra una coincidencia, busca en el siguiente vocabulario de mayor prioridad, y así sucesivamente. Si encuentra una sola coincidencia, crea el enlace y se mueve al siguiente registro de encabezados para evaluar el enlace. Este proceso es un poco diferente para los registros bibliográficos con un segundo indicador de 7 (ver la explicación anterior).
Cuando las prioridades de autoridad se hayan configurado y el sistema encuentre varias coincidencias para la primera prioridad, no continuará a la segunda/siguiente prioridad para evaluar que los registros bibliográficos y de autoridad tenga una coincidencia. Instead, the multi-match is reported in the Authority Control Task List (see Working with the Authority Control Task List When Authority Priorities Are Configured for more information).
Enabled Linking Refinements
A record that is linked to a lower priority vocabulary can be re-evaluated during the Authorities - Link BIB Headings job run to be linked to a higher priority vocabulary. For example, when a record is linked to an LCNAMES authority headings that is a second priority and HKCAN is the first priority and then a matching HKCAN authority is added, on a subsequent run of the Authorities - Link BIB Headings job, the system relinks the record to the HKCAN authority headings. Note that the process for re-evaluating a linked record for a higher priority vocabulary is true for both Names and Subjects authority priority settings.
The Linking - BIB heading was re-linked to an AUT record with higher priority report in the Authority Control Task List provides additional information regarding relinking when the Authorities - Link BIB Headings job is run. If you want to use this report, you need to enable it in the Authority Control List Type Review code table (Configuration Menu > Resources > General > Authority Control Task List Types). De forma predeterminada, este tipo de informe está deshabilitado. See Configuring Authority Control Task List Report Types for more information.
Trabajar con la lista de tareas de control de autoridad cuando se configuran prioridades de autoridad
After the scheduled Authorities - Link BIB Headings job has run, the headings record may be identified as a linked (single match found), no match, or multi-match (multiple matches were found in a vocabulary) record. Los casos de no coincidencia y de múltiples coincidencias aparecen en la lista de tareas de control de autoridad para su atención. In addition to these scenarios that appear in the Authority Control Task List, the following additional multi-match cases appear when your system has been configured for authority priorities (configurable only by Ex Libris):
- Multi-matches found in any of the configured vocabularies and not linked - Since you can have up to three priority vocabularies configured, the headings record can be listed more than once in the Authority Control Task List for each vocabulary in which it is identified as having multiple matches.
- Múltiples coincidencias encontradas en alguno de los vocabularios configurados y enlazados - En este escenario, se encontraron múltiples coincidencias en los vocabularios de mayor prioridad, pero se encontró una sola coincidencia en un vocabulario de menor prioridad, y el registro de encabezados está enlazado al registro de vocabularios de menor prioridad. A pesar de que hay un enlace, el propósito de mostrar este caso en la lista de tareas de control de autoridad, es ofrecer la oportunidad de seleccionar de forma manual un enlace de vocabulario mejor y de mayor prioridad desde las múltiples coincidencias.
For more information about linking, see Working with Authority Records.
Also see Using the Authority Control Task List page for more information.
Page tags: article:topicproduct:almacontent:Documentationlang:englishmultiple authority vocabulariesauthority priority