典拠の優先順位
典拠の優先順位を操作するための概要と手順。
A priority order of names and subject headings (up to three when a bibliographic record's second indicator is a number 0 through 6) can be configured when you have multiple authority vocabularies defined for your system as identified in the list of vocabularies in your Metadata Configuration (see Configuring Cataloging).この機能は、Ex Librisで設定する必要があります。If you want to implement this capability contact Support.
典拠の優先順位の目的は、件名の標目と名前に複数の典拠単語が使用される場合に、典拠管理の観点から単語間の優先順位を識別することです。
優先度リストで別の方法で定義されている場合でも、ローカル語彙は常に最優先度を持ちます。
When priorities have been configured for multiple subject headings or names authority vocabularies and users perform an F3 check of authorities in the Metadata Editor, all of the vocabularies defined are displayed, each in a separate tab.タブを確認し、関連する語彙を選択し、その中の典拠見出しを選択することで、最も一致する典拠を検索できます。
The linking process automatically searches for the best match according to the priority, see Linking Process with the Authorities - Link BIB Headings Job for Authority Priorities.
件名の標目や名前に用いられる複数の典拠単語に優先順位が設定されている場合、例として、MDエディタで典拠のF3チェックを実行できます。また、デフォルトの優先順位一位の単語が標目に見つからない場合、システムは優先順位二位をチェックして一致を見つけます。優先順位二位の単語が標目に見つからない場合、システムは優先順位三位をチェックして一致を見つけます。F3機能に追加して、この機能は一般的な典拠管理にも適用されます。
Note that for bibliographic records with a second indicator of 7 and $2 specified, the Ex Libris configuration options and behavior of this feature are slightly different for this scenario.第2インジケータが7の書誌レコードの場合、Ex Librisは標目に2つの優先順位を設定できます。$2で指定された単語は、[単語の除外]オプションが設定されている場合を除き、優先順位第三位(最後)と見なされます。[単語の除外]オプションを使用する場合、次が該当します。
- Ex Librisで、(ユーザー定義により)複数の単語を設定できます。
- The explicitly defined first and second priorities are not used.
- Bibliographic records are linked to authority headings when the value in $2 matches one of the vocabularies configured for Exclude Vocabularies.
- If the value in $2 does not match any of the vocabularies configured for Exclude Vocabularies, no linking occurs.
- 典拠のF3チェックが実行されると、$2の値のみが標目リストに典拠タブとして表示されます。Note that when the Exclude Vocabularies option is not used, tabs for the vocabularies specified in the first and second priority and the vocabulary specified in $2 appear in the headings list.
この機能は、次の基準に基づいた単語をサポートします。
- MARC 21 / KORMARC
The authority priority configuration may contain a m ix of authority registry vocabularies.
多言語単語では、典拠の優先順位はサポートされていません。
この機能に関連するコミュニティゾーン アップデート作業リストに考慮事項がある場合があります。See Creating a MARC21 Bibliographic Record,Browsing Bibliographic Headings, and Working with the Authority Control Task List When Authority Priorities Are Configured for more information.
Contact Ex Libris to configure the authority priorities for your system.
The authority priority configuration is only available in production environments.
典拠とリンキングプロセス - 典拠の優先順位に関する書誌標目のリンクジョブ
When authority priorities are configured and the scheduled linking job (Authorities - Link BIB Headings) runs, it looks for headings matches starting with the highest priority vocabulary.一致するものが見つからない場合、次に優先度の高い単語などが検索されます。単一一致が見つかった場合、リンクを作成し、次に評価するレコードに移動します。このプロセスは、第2インジケータが7の書誌レコードでは少し異なります (上記の説明を参照)。
典拠の優先順位が設定され、システムにより優先順位第一位の単語との一致が複数件見つかった場合、その書誌および典拠レコードと優先順位第二位/次に優先度の高い単語との一致の評価には進みません。Instead, the multi-match is reported in the Authority Control Task List (see Working with the Authority Control Task List When Authority Priorities Are Configured for more information).
Enabled Linking Refinements
A record that is linked to a lower priority vocabulary can be re-evaluated during the Authorities - Link BIB Headings job run to be linked to a higher priority vocabulary.For example, when a record is linked to an LCNAMES authority headings that is a second priority and HKCAN is the first priority and then a matching HKCAN authority is added, on a subsequent run of the Authorities - Link BIB Headings job, the system relinks the record to the HKCAN authority headings.Note that the process for re-evaluating a linked record for a higher priority vocabulary is true for both Names and Subjects authority priority settings.
The Linking - BIB heading was re-linked to an AUT record with higher priority report in the Authority Control Task List provides additional information regarding relinking when the Authorities - Link BIB Headings job is run.If you want to use this report, you need to enable it in the Authority Control List Type Review code table (Configuration Menu > Resources > General > Authority Control Task List Types).By default, this report type is disabled.See Configuring Authority Control Task List Report Types for more information.
典拠の優先順位が設定されている場合の典拠管理タスクリストの操作
After the scheduled Authorities - Link BIB Headings job has run, the headings record may be identified as a linked (single match found), no match, or multi-match (multiple matches were found in a vocabulary) record.一致しない場合と複数一致する場合は、ユーザーの注意を促すために典拠管理タスクリストに表示されます。In addition to these scenarios that appear in the Authority Control Task List, the following additional multi-match cases appear when your system has been configured for authority priorities (configurable only by Ex Libris):
- Multi-matches found in any of the configured vocabularies and not linked - Since you can have up to three priority vocabularies configured, the headings record can be listed more than once in the Authority Control Task List for each vocabulary in which it is identified as having multiple matches.
- 設定された単語のいずれかで複数一致が見つかり、かつリンク済み - このシナリオでは、優先度の高い単語で複数の一致が見つかりましたが、優先度の低い単語で単一の一致が見つかり、標目レコードは優先度の低い単語レコードにリンクされます。リンクはあるものの、[典拠管理タスクリスト]にこのケースを表示する目的は、複数の一致からより良い、より優先度の高い単語リンクを手動で選択できるようにするためです。
For more information about linking, see Working with Authority Records.
Also see Using the Authority Control Task List page for more information.
Page tags: article:topicproduct:almacontent:Documentationlang:englishmultiple authority vocabulariesauthority priority